Mark Berry February 25, 2013
On my Server 2012 Essentials virtual machine, I was getting five or six messages every day telling me that the server is not connected to the Internet, even though it is. The messages appeared in a balloon alert in my system tray (from the 2012 Essentials Launchpad) as well as in the event log:More...
Mark Berry September 20, 2012
When you export a DNS zone from Go Daddy, there is some unusual formatting. IF you don’t fix it before importing it into DNS Made Easy (and probably other hosts), you may find that DNS queries are not resolving as expected. In my case, that meant email was not getting through.More...
Mark Berry September 19, 2012
After the Go Daddy DNS meltdown earlier this month, and since they do not allow secondary DNS unless you pay them, I’m experimenting with using DNS Made Easy for my primary DNS and BuddyNS for my secondary DNS. (At $30 yearly, a 10-domain DNS Made Easy account is less expensive than adding Go Daddy’s Premium DNS for $36/year.)
DNS Made Easy has lots of name servers hidden behind their six name server IP addresses, but even they can be affected by a DDoS attack (as there were in 2010). Theoretically, by using two DNS providers, if one goes down, at least half of the DNS queries to my domain will still be resolved by the other provider.More...
Mark Berry September 20, 2009
Occasionally on my Windows XP Pro SP3 machine, Outlook 2007 SP2 will tell me that it has had an error receiving POP mail from my SBS 2003 server, which resides on the same network.
I started a command prompt and typed “ping myserver.mydomain.local”. Sure enough, I get back the message “Ping request could not find host myserver.mydomain.local. Please check the name and try again.”
An nslookup works fine, so I know the SBS server is there and is responding to DNS requests.
In fact, I can “ping myserver” without problems. But for some reason, pinging the fully-qualified internal name doesn’t work.
Sometimes, I can just type “ipconfig /flushdns” to clear this up. Today that didn’t work. However once I actually stopped and started the DNS cache, ping started working and so did email:
net stop DNScache
net start DNScache
Mark Berry September 12, 2007
The Only Thing Constant is Change
On January 29, 2004, the the IP address for the DNS root hint for b.root-servers.net changed to 126.96.36.199:
Copy from Server Doesn't Always Copy from Server
I was testing the DNS configuration on two Windows Server 2003 machines. One is R2 SP2; the other is SBS 2003 SP2. In the DNS server's properties, on the Root Hints tab, I clicked on the Copy from Server button and copied from 188.8.131.52 (a Level 3 DNS server). However, this did not update the address for b.root-servers.net; it still showed the old 184.108.40.206. So when I ran dcdiag /test:dns, it reported an error on accessing b.root-servers.net.
I tried removing b.root-servers.net and copying from 220.127.116.11. This time, b.root-servers.net showed up with IP Address “Unknown”. This is strange, since I can use nslookup against 18.104.22.168 and get the correct address for b.root-servers.net. Apparently 22.214.171.124 does not let you copy root hints, although no error is displayed.
Next I tried copying from my ISP's DNS server. This worked, but it did not replace the old IP address; it just added the new one.
The bottom line is that once you get your root hints set up, you'd better double-check them against the official list here.
Old DCDiag Raises False Alarms
Another “gotcha” I encountered is that the original DCDiag program in Windows Server 2003 Support Tools was telling me that all of my root hints were bad. Microsoft Support suggested updating to the SP2 version of Support Tools, which did in fact fix that problem.More...
Mark Berry July 5, 2007
A post in the Yahoo group mssmallbiz asked an interesting question: when DNS Forwarders are configured under SBS 2003, is there a way to get the secondary nameserver to automatically take over when the primary is unavailable?
Don't Use Forwarders
The answer was simple: don't use forwarders. Go to Start > Administrative Tools > DNS, go into the Properties for the server, go to the Forwarders tab, and click Remove until they are gone.
Do Use Root Hints
Then make sure the root hints are up to date. The poster suggested using Windows Update. I didn't see root hints there, but I found a simple way to refresh them: in the DNS Properties, go to the Root Hints tab, click on Copy from Server, and enter 126.96.36.199 as the IP address to copy the hints from.
Posters seemed to think that relying solely on root hints is actually faster for resolving external DNS queries.
The instructions work for Windows Server 2003 as well as SBS 2003!
Update: copying root hints from 188.8.131.52 doens't work. See this post for details and a solution.More...
Welcome to MCB Systems!
MCB Systems is a San Diego-based provider of software and information technology services.
Our software services include customization and programming to make software work for you.
Our proactive I.T. services help businesses control costs by providing a fixed monthly bill for routine I.T. services.
We take a consulting approach that listens first and provides solutions tailored to your business.
This Tech Blog is geared towards programmers and I.T. professionals, but end users may be interested to glimpse what goes on "behind the scenes" in developing software and keeping their computing environments stable and secure. Also visit the main User Blog.
Blog author Mark Berry owns MCB Systems.
Contact MCB Systems today to discuss your technology needs!
- Office 365 SMTP Relay: What KB2600912 Doesn’t Tell You
- Lenovo System Update UNCServer.exe
- Event 7026: Boot-Start Device SBRE Failed to Load
- Scoped Snapshots vmicvss Error 13 on Server 2012, Windows 8
- Batch Convert PDF to PDF/A
- Find the Largest Files on a Linux Machine
- Use CutePDF to Print to PDF/A for Free
- Access Point Won’t Stay Up with POE
- Restore a Hyper-V Server to an Optiplex 960, Take 3
- Adding a Target Volume Using Wbadmin