http://www.mcbsys.com/techblog/2008/11/setting-up-pbx-in-a-flash-part-3-configuring-freepbx/ Custom Software and I.T. Services Mon, 06 Feb 2012 18:05:46 +0000 http://wordpress.org/?v=2.9.2 hourly 1 http://www.mcbsys.com/techblog/2008/11/setting-up-pbx-in-a-flash-part-3-configuring-freepbx/comment-page-1/#comment-19 David Viktora Tue, 30 Dec 2008 06:25:32 +0000 /mark/post/Setting-Up-PBX-in-a-Flash2c-Part-3-Configuring-FreePBX.aspx#comment-19 I do have a little problem: after receiving an inbound fax message (which works flawlessly, accepted message is in perfect shape) the PIAF does not hang up the PSTN trunk that had been used for receiving (in fact, after activating of the fax modul the system behaves so for all incoming calls, including fax messages). I guess the fax module does not detect end of the call and therefore does not send the hangup command onto the PSTN gate concerned). I would really appreciate any tipp or guide as to what to do to get this fixed... I do have a little problem: after receiving an inbound fax message (which works flawlessly, accepted message is in perfect shape) the PIAF does not hang up the PSTN trunk that had been used for receiving (in fact, after activating of the fax modul the system behaves so for all incoming calls, including fax messages). I guess the fax module does not detect end of the call and therefore does not send the hangup command onto the PSTN gate concerned). I would really appreciate any tipp or guide as to what to do to get this fixed…

]]>